G5-2000WC-handheld-laser

G5-2000WC HANDHELD LASER WELDER

MAKE MONEY WHILE YOU WELD – 5 TIMES FASTER THAN TIG

Typically 5 times faster than TIG. Much easier to use than MIG and TIG.
Our G5-2000WC uses the latest generation laser source for high electrical efficiency, reliability and stability.
Higher duty cycle than its main competitors thanks to an efficient internal heat pump system. Weld up to 100% duty cycle at 105°F.
Proven reliability in the Australian market.

THE BEST WELDS, TIME AFTER TIME

Gen5 models have the best welding head and control system. Easy to use. Easy to dial up the correct weld each time.
By using our pre-sets (which are also able to be updated or reverted to factory settings) welding becomes process controlled.
Our optional wire feeder provides speed control, giving beautiful, consistent welds.
Customer testing showed our welds were stronger than TIG, even with a smaller fillet, because we don’t overheat the metal.

Using the double pendulum galvanometer (two rotating mirrors) our head can trace up to six very useful patterns for welding, including the common circle pattern, oval ellipse, triangle and hourglass figure 8 shapes. The pattern size can range from 0mm for laser cutting, up to 5mm diameter if required by your situation. The standard head is our 4th generation “double wobble” welding head, which we believe is the best commercially available hand held laser welding head.

2000W of laser power easily penetrates and welds up to 5mm thick stainless steel or carbon steel including galvanized steel, and aluminum with full penetration.

We include a useful range of welding tips to suit external, internal and butt joints, including wire feeder types. Spare protective lenses are also included. This fiber laser welder requires little practice to start using and welds very quickly. For anyone welding sheet metal, this machine can save you a lot of time and money in your welding production.

The overall dimensions of this water cooled laser welder are a compact 33”x23”x30” and 310 lbs.

LASER CLEANING OPTION AVAILABLE (but not on this welder)

LASER CLEANING is available if required. That touchscreen control system has welding and cleaning interfaces built in, so you can switch between welding and cleaning at the touch of button.  It can switch betweening cleaning up to 30mm wide and welding WITHOUT opening the optics.  This is a huge advantage over competing units which require major work to change over.  NOTE:  Competitors that swap heads or optic components introduce the risk of dust entry into the light path, which can damage the head or laser source.  We strongly recommend the use of dedicated cleaners rather than swapping back and forth.

SPECIFICATIONS

SAFETY NOTES

1.  Laser welders are Class IV lasers.  They can start fires and burn skin at close range but are also dangerous to the eyes for at least 100 metres, so special safety measures are required.  We provide guidance on safety, but because safety is so important our safety acknowledgement must be signed before shipping and using the laser welder.
2. You must purchase and use our safety glasses and laser welding helmet with this machine.  In any case these are the best value on the market, with high and known protection levels, so you should be using them anyway.