Sign: “Danger – Laser On” LED, Red Flashing 6” x 4”

Sign “Danger – Laser On” LED, Red Flashing, 6” x 4”

LED low power sign running from 8V to 25V DC input.  Low power consumption, less than 2 Watts.   Long life LEDs

Black when off, with red

These signs are normally wired to the 15 or 24V DC power supply of the laser welder, so when the laser operating system is powered up, the sign is flashing.

Overall size of front flange or face is 150mm wide (5.9″) x 100mm high (3.94″) x 35mm deep (1.38″)

Panel mount type, best suited to panels 1 to 4mm thick (.040″ – .160″)

Cutout size 141 to 143mm wide (5.6″) x 84mm high (3.30″)

Pigtail wire length 250mm (10″).