ADVANTAGES OF OUR 2000W AIR COOLED LASER WELDER
LASER WELDING SAVES YOU MONEY – FAST
- Unbeatable productivity gains – Typically 5x as fast as TIG
- No pre or post processing required for most welds
- Pays back in as little as 3 months. Unbeatable value
- Uses 1/4 the electricity and 1/3 the gas of TIG
LASER WELDING SOLVES THE SKILLS SHORTAGE – EASY TO USE
- Pre-sets for material > thickness > weld type, and custom presets
- Full access to parameters via our large 7” easy to use touchscreen
- Critical parameters are password protected for administrators
- Minimal skill is required. Easy to learn.
LASER WELDING IS STRONG
- 2000W laser output far outstrips others. 1200W and 1500W competitors just don’t cut it
- High power density for deeper penetration up to 1/4″ with stronger welds
- High brightness design allows welding of aluminum, copper and brass
- Full penetration of ¼” steel, stainless and alum. (3/16” at ½”/sec travel speed)
- Twin wire feeder option for larger fillets
4 IN 1 VERSATILITY
- Laser welding
- Weld seam cleaning
- Wide laser cleaning (with focus lens change)
- Laser cutting
HIGH QUALITY LASER WELDS
- Beautiful, consistent, high quality welds.
- Process controlled: 90% machine, 10% operator
- Typically 1/4 the heat input of arc. Less HAZ, distortion and staining
- No spatter
CLASS LEADING DURABILITY
- Patented LASERBLOCK back reflection suppressor mitigates the weak point of others
- Patented SPARKBLOCK protection for the protective lens
- Superior duty cycle in hot weather, 100% at 100°F
- No freeze damage risk. Operates in temperature extremes from 20°F up to 110°F
- Made in Australia by our sister company Laser-welder.com.au
SPECIFICATIONS
| Functions | Weld, Seam Clean, Wide Clean, Cut |
| Laser power | 2000W nominal maximum |
| Laser wavelength and safety class | 1080nm+/-5nm. Class IV (4) |
| Red guide laser | Class II (2) |
| Penetration | 0.5mm to 4mm at ½”/s travel speed |
| Materials | Aluminum, stainless & steel. Also Cu, Ti, etc |
| Dimensions | 26”x15”x38” high including wire feeder |
| Weight | 120lbs (54kg) including wire feeder |
| Wire feeder | Top mount or optional floor mount or twin feed |
| Wire sizes | .032, .040, .048, .062 with V and U groove rollers |
| Wire spool sizes | Up to 12” & 2” bore) (305mm & 52mm bore) |
| Duty cycle | 100% at up to 100°F |
| Operating temperature & humidity | 20°F – 110°F, <90% humidity |
| Laser helmet required | 0D8 or higher (OSHA 1926.102c) @1080nm + OD6 glasses |
| Safety interlocks for gun | Yes. Normally closed |
| Safety interlock for door | Two interlocks available. Normally closed |
| Wall plug efficiency | 35% |
| Power supply required | 240V 30A |
LASER WELDER SYSTEM INCLUDES
- Lightwelder 2 2000W Laser welder with cables
- Laser welder Gen2 helmet, 1080nm US OD8+ (EN207 D LB 8)
- Fiber laser glasses, 1080nm US OD6+ (EN207 D LB 6)
- Single wire feeder, top mounted
- Rollers, 0.8mm (.032”), 1.0 (.040”), 1.2 (.048”), 1.6mm (.062”) with V and U (aluminum) grooves
- Wire feed cable, steel, 5m long
- Wire feed cable, graphite lined, 5m long
- Gas feed tube, 5m long, 6mm OD. Adaptor and PU tube 5mm ID, 8mm OD to suit 5.4mm barb/nipple
LASER WELDER OPTIONAL EXTRAS
Twin wire feeder with cables, combiner and head attachment. Suits 12″ spools.





















Reviews
There are no reviews yet.